`mongodump`¶

On this page

Synopsis
Behavior
Required Access
Options
Use

Mac OSX Sierra and Go 1.6 Incompatibility

Users running on Mac OSX Sierra require the 3.2.10 or newer version of mongodump.

Synopsis¶

mongodump is a utility for creating a binary export of the contents of a database. mongodump can export data from either mongod or mongos instances.

mongodump can be a part of a backup strategy with mongorestore for partial backups based on a query, syncing from production to staging or development environments, or changing the storage engine of a standalone. However, the use of mongodump and mongorestore as a backup strategy can be problematic for sharded clusters and replica sets.

For an overview of mongodump in conjunction with mongorestore part of a backup and recovery strategy, see Back Up and Restore with MongoDB Tools.

Behavior¶

Data Exclusion¶

mongodump excludes the content of the local database in its output.

mongodump only captures the documents in the database in its backup data and does not include index data. mongorestore or mongod must then rebuild the indexes after restoring data.

Version Compatibility¶

The data format used by mongodump from version 2.2 or later is incompatible with earlier versions of mongod. Do not use recent versions of mongodump to back up older data stores.

Read Preference¶

Changed in version 3.0.5: For a sharded cluster where the shards are replica sets, mongodump, when run against the mongos instance, no longer prefers reads from secondary members.

Overwrite Files¶

mongodump overwrites output files if they exist in the backup data folder. Before running the mongodump command multiple times, either ensure that you no longer need the files in the output folder (the default is the dump/ folder) or rename the folders or files.

Data Compression Handling¶

When run against a mongod instance that uses the WiredTiger storage engine, mongodump outputs uncompressed data.

Working Set¶

mongodump can adversely affect performance of the mongod. If your data is larger than system memory, the mongodump will push the working set out of memory.

Required Access¶

To run mongodump against a MongoDB deployment that has access control enabled, you must have privileges that grant find action for each database to back up. The built-in backup role provides the required privileges to perform backup of any and all databases.

Changed in version 3.0.9: The backup role provides additional privileges to back up the system.profile collections that exist when running with database profiling. Previously, users required an additional read access on this collection.

Options¶

Changed in version 3.0.0: mongodump removed the --dbpath as well as related --directoryperdb and --journal options. To use mongodump, you must run mongodump against a running mongod or mongos instance as appropriate.

mongodump¶

--help¶: Returns information on the options and use of mongodump.

--verbose, -v¶: Increases the amount of internal reporting returned on standard output or in log files. Increase the verbosity with the -v form by including the option multiple times, (e.g. -vvvvv.)

--quiet¶

Runs the mongodump in a quiet mode that attempts to limit the amount of output.

This option suppresses:

output from database commands
replication activity
connection accepted events
connection closed events

--version¶: Returns the mongodump release number.

--host <hostname><:port>, -h <hostname><:port>¶

Default: localhost:27017

Specifies a resolvable hostname for the mongod to which to connect. By default, the mongodump attempts to connect to a MongoDB instance running on the localhost on port number 27017.

To connect to a replica set, specify the replSetName and a seed list of set members, as in the following:

copy

<replSetName>/<hostname1><:port>,<hostname2><:port>,<...>

You can always connect directly to a single MongoDB instance by specifying the host and port number directly.

Changed in version 3.0.0: If you use IPv6 and use the <address>:<port> format, you must enclose the portion of an address and port combination in brackets (e.g. [<address>]).

--port <port>¶

Default: 27017

Specifies the TCP port on which the MongoDB instance listens for client connections.

--ipv6¶: Enables IPv6 support and allows the mongodump to connect to the MongoDB instance using an IPv6 network. All MongoDB programs and processes disable IPv6 support by default.

--ssl¶: New in version 2.6.

Enables connection to a mongod or mongos that has TLS/SSL support enabled.

Changed in version 3.0: Most MongoDB distributions now include support for TLS/SSL. See Configure mongod and mongos for TLS/SSL and TLS/SSL Configuration for Clients for more information about TLS/SSL and MongoDB.

--sslCAFile <filename>¶: New in version 2.6.

Specifies the .pem file that contains the root certificate chain from the Certificate Authority. Specify the file name of the .pem file using relative or absolute paths.

Changed in version 3.0: Most MongoDB distributions now include support for TLS/SSL. See Configure mongod and mongos for TLS/SSL and TLS/SSL Configuration for Clients for more information about TLS/SSL and MongoDB.

Warning

For SSL connections (--ssl) to mongod and mongos, if the mongodump runs without the --sslCAFile, mongodump will not attempt to validate the server certificates. This creates a vulnerability to expired mongod and mongos certificates as well as to foreign processes posing as valid mongod or mongos instances. Ensure that you always specify the CA file to validate the server certificates in cases where intrusion is a possibility.

--sslPEMKeyFile <filename>¶

New in version 2.6.

Specifies the .pem file that contains both the TLS/SSL certificate and key. Specify the file name of the .pem file using relative or absolute paths.

This option is required when using the --ssl option to connect to a mongod or mongos that has CAFile enabled without allowConnectionsWithoutCertificates.

Changed in version 3.0: Most MongoDB distributions now include support for TLS/SSL. See Configure mongod and mongos for TLS/SSL and TLS/SSL Configuration for Clients for more information about TLS/SSL and MongoDB.

--sslPEMKeyPassword <value>¶

New in version 2.6.

Specifies the password to de-crypt the certificate-key file (i.e. --sslPEMKeyFile). Use the --sslPEMKeyPassword option only if the certificate-key file is encrypted. In all cases, the mongodump will redact the password from all logging and reporting output.

If the private key in the PEM file is encrypted and you do not specify the --sslPEMKeyPassword option, the mongodump will prompt for a passphrase. See SSL Certificate Passphrase.

Changed in version 3.0: Most MongoDB distributions now include support for TLS/SSL. See Configure mongod and mongos for TLS/SSL and TLS/SSL Configuration for Clients for more information about TLS/SSL and MongoDB.

--sslCRLFile <filename>¶: New in version 2.6.

Specifies the .pem file that contains the Certificate Revocation List. Specify the file name of the .pem file using relative or absolute paths.

Changed in version 3.0: Most MongoDB distributions now include support for TLS/SSL. See Configure mongod and mongos for TLS/SSL and TLS/SSL Configuration for Clients for more information about TLS/SSL and MongoDB.

--sslAllowInvalidCertificates¶: New in version 2.6.

Bypasses the validation checks for server certificates and allows the use of invalid certificates. When using the allowInvalidCertificates setting, MongoDB logs as a warning the use of the invalid certificate.

Changed in version 3.0: Most MongoDB distributions now include support for TLS/SSL. See Configure mongod and mongos for TLS/SSL and TLS/SSL Configuration for Clients for more information about TLS/SSL and MongoDB.

--sslAllowInvalidHostnames¶: New in version 3.0.

Disables the validation of the hostnames in TLS/SSL certificates. Allows mongodump to connect to MongoDB instances even if the hostname in their certificates do not match the specified hostname.

Changed in version 3.0: Most MongoDB distributions now include support for TLS/SSL. See Configure mongod and mongos for TLS/SSL and TLS/SSL Configuration for Clients for more information about TLS/SSL and MongoDB.

--sslFIPSMode¶: New in version 2.6.

Directs the mongodump to use the FIPS mode of the installed OpenSSL library. Your system must have a FIPS compliant OpenSSL library to use the --sslFIPSMode option.

Note

FIPS-compatible SSL is available only in MongoDB Enterprise. See Configure MongoDB for FIPS for more information.

--username <username>, -u <username>¶: Specifies a username with which to authenticate to a MongoDB database that uses authentication. Use in conjunction with the --password and --authenticationDatabase options.

--password <password>, -p <password>¶: Specifies a password with which to authenticate to a MongoDB database that uses authentication. Use in conjunction with the --username and --authenticationDatabase options.

Changed in version 3.0.0: If you do not specify an argument for --password, mongodump returns an error.

Changed in version 3.0.2: If you wish mongodump to prompt the user for the password, pass the --username option without --password or specify an empty string as the --password value, as in --password "" .

--authenticationDatabase <dbname>¶: If you do not specify an authentication database, mongodump assumes that the database specified to export holds the user’s credentials.

--authenticationMechanism <name>¶

Default: SCRAM-SHA-1

New in version 2.4.

Changed in version 2.6: Added support for the PLAIN and MONGODB-X509 authentication mechanisms.

Changed in version 3.0: Added support for the SCRAM-SHA-1 authentication mechanism. Changed default mechanism to SCRAM-SHA-1.

Specifies the authentication mechanism the mongodump instance uses to authenticate to the mongod or mongos.

Value	Description
SCRAM-SHA-1	RFC 5802 standard Salted Challenge Response Authentication Mechanism using the SHA1 hash function.
MONGODB-CR	MongoDB challenge/response authentication.
MONGODB-X509	MongoDB TLS/SSL certificate authentication.
GSSAPI (Kerberos)	External authentication using Kerberos. This mechanism is available only in MongoDB Enterprise.
PLAIN (LDAP SASL)	External authentication using LDAP. You can also use `PLAIN` for authenticating in-database users. `PLAIN` transmits passwords in plain text. This mechanism is available only in MongoDB Enterprise.

--gssapiServiceName¶

New in version 2.6.

Specify the name of the service using GSSAPI/Kerberos. Only required if the service does not use the default name of mongodb.

This option is available only in MongoDB Enterprise.

--gssapiHostName¶

New in version 2.6.

Specify the hostname of a service using GSSAPI/Kerberos. Only required if the hostname of a machine does not match the hostname resolved by DNS.

This option is available only in MongoDB Enterprise.

--db <database>, -d <database>¶: Specifies a database to backup. If you do not specify a database, mongodump copies all databases in this instance into the dump files.

--collection <collection>, -c <collection>¶: Specifies a collection to backup. If you do not specify a collection, this option copies all collections in the specified database or instance to the dump files.

--query <json>, -q <json>¶

Provides a JSON document as a query that optionally limits the documents included in the output of mongodump.

You must enclose the query in single quotes (e.g. ') to ensure that it does not interact with your shell environment.

--forceTableScan¶

Forces mongodump to scan the data store directly: typically, mongodump saves entries as they appear in the index of the _id field. If you specify a query --query, mongodump will use the most appropriate index to support that query.

Use --forceTableScan to skip the index and scan the data directly. Typically there are two cases where this behavior is preferable to the default:

If you have key sizes over 800 bytes that would not be present in the _id index.
Your database uses a custom _id field.

When you run with --forceTableScan, mongodump does not use $snapshot. As a result, the dump produced by mongodump can reflect the state of the database at many different points in time.

Important

Use --forceTableScan with extreme caution and consideration.

--out <path>, -o <path>¶

Specifies the directory where mongodump will write BSON files for the dumped databases. By default, mongodump saves output files in a directory named dump in the current working directory.

To send the database dump to standard output, specify “-” instead of a path. Write to standard output if you want process the output before saving it, such as to use gzip to compress the dump. When writing standard output, mongodump does not write the metadata that writes in a <dbname>.metadata.json file when writing to files directly.

--repair¶

Runs a repair option in addition to dumping the database. The repair option changes the behavior of mongodump to only write valid data and exclude data that may be in an invalid state as a result of an improper shutdown or mongod crash.

The --repair option uses aggressive data-recovery algorithms that may produce a large amount of duplication.

--repair is only available for use with mongod instances using the mmapv1 storage engine. You cannot run --repair with mongos or with mongod instances that use the wiredTiger storage engine. To repair data in a mongod instance using wiredTiger use mongod --repair.

--oplog¶

Creates a file named oplog.bson as part of the mongodump output. The oplog.bson file, located in the top level of the output directory, contains oplog entries that occur during the mongodump operation. This file provides an effective point-in-time snapshot of the state of a mongod instance. To restore to a specific point-in-time backup, use the output created with this option in conjunction with mongorestore --oplogReplay.

Without --oplog, if there are write operations during the dump operation, the dump will not reflect a single moment in time. Changes made to the database during the update process can affect the output of the backup.

--oplog has no effect when running mongodump against a mongos instance to dump the entire contents of a sharded cluster. However, you can use --oplog to dump individual shards.

--oplog only works against nodes that maintain an oplog. This includes all members of a replica set, as well as master nodes in master/slave replication deployments.

--oplog does not dump the oplog collection.

--dumpDbUsersAndRoles¶: Includes user and role definitions in the database’s dump directory when performing mongodump on a specific database. This option applies only when you specify a database in the --db option. MongoDB always includes user and role definitions when mongodump applies to an entire instance and not just a specific database.

--excludeCollection string¶: New in version 3.0.0.

Excludes the specified collection from the mongodump output. To exclude multiple collections, specify the --excludeCollection multiple times.

--excludeCollectionsWithPrefix string¶: New in version 3.0.0.

Excludes all collections with a specified prefix from the mongodump outputs. To specify multiple prefixes, specify the --excludeCollectionsWithPrefix multiple times.

Use¶

For an overview of mongodump usage, see Back Up and Restore with MongoDB Tools

For an overview of mongorestore, which provides the related inverse functionality, see the mongorestore document.

The following operation creates a dump file that contains only the collection named collection in the database named test. In this case the database is running on the local interface on port 27017:

copy

mongodump  --db test --collection collection

`mongodump` a Database Excluding Specified Collections¶

The following operation dumps all collections in the test database except for users and salaries:

copy

mongodump  --db test --excludeCollection=users --excludeCollection=salaries

`mongodump` with Access Control¶

In the next example, mongodump creates a database dump located at /opt/backup/mongodump-2011-10-24, from a database running on port 37017 on the host mongodb1.example.net and authenticating using the username user and the password pass, as follows:

copy

mongodump --host mongodb1.example.net --port 37017 --username user --password pass --out /opt/backup/mongodump-2011-10-24

← mongos.exe mongorestore →

mongodump¶

Synopsis¶

Behavior¶

Data Exclusion¶

Version Compatibility¶

Read Preference¶

Overwrite Files¶

Data Compression Handling¶

Working Set¶

Required Access¶

Options¶

Use¶

mongodump a Database Excluding Specified Collections¶

mongodump with Access Control¶

`mongodump`¶

`mongodump` a Database Excluding Specified Collections¶

`mongodump` with Access Control¶